A tyre size reads like 225/45R17 — width in mm, aspect ratio (sidewall as a percentage of width), then the rim in inches. Enter your original and new sizes to see how the rolling diameter changes what your speedometer and odometer show.
Original tyre size
New tyre size
Speedometer error
+1.42%
Actual speed at 100 km/h
101.4 km/h
Original diameter
634.3 mm
New diameter
643.3 mm
Reading the result: a positive error means the new tyre is larger — the speedometer under-reads (it shows less than you are actually doing). A negative error means it over-reads. Your odometer moves by the same ratio: 100 km/h shown is about 101.4 km/h travelled (+9.0 mm diameter difference).
Formulas: diameter (mm) = 2 × (width × aspect ÷ 100) + rim × 25.4; ratio = new diameter ÷ original diameter; actual speed = indicated speed × ratio; speedometer error % = (ratio − 1) × 100. Figures assume the nominal sizes printed on the tyre — real rolling radius varies slightly with load, pressure and wear. All calculation happens in your browser; nothing is stored or sent.